About our Baumatic Glass Splashbacks
Using the above tool you can design a glass splashback to fit your curved Baumatic cooker hood. We are able to manufacture them in any width or height that you require with the
shape of the hood being in the exact center of the glass (unless you advise us otherwise). Our Baumatic glass splashbacks are available in over 2000 colours (we can also digitally print them with any design, pattern or stripe)
Width
For widths greater than the width of the selected cooker hood model we will continue the
glass at the same gradient/slope/curve of the cooker hood to the edge of the glass.
Height
The height measurement should be taken from the center point of the cooker hood to the worktop (minus a 3-4mm expansion gap), so please take this into account when measuring.
These Baumatic splashbacks are designed to be fitted before fitting your cooker hood in case your worktop or hood are not level etc. In the event that your cooker hood is already fitted
you should be able to adjust the height or angle of your cooker to fit if necessary.
How do I find my exact model number?
You can usually find your specific model of cooker hood by taking out the
filters, it will be written on a sticker near the fan assembly
These glass splashbacks are manufactured by us to fit around a Baumatic cooker hood, they are NOT manufactured by Baumatic.
|
|