Mirror Splashbacks · Made to measure

Onyx Mirror Splashback

Toughened, cut to your sizes in Belfast, and safe behind every hob, including gas.

£50.00
inc. VAT

Finish Onyx Amber

*
*
*
*
*

A hydrophobic nano coating that makes the
surface more grease and water repellent

*
*
*

Provides extra protection to the backing by
protecting against wall salts and damp

*
- +

Made to order in Belfast · usually dispatched in 3–4 weeks

Not sure? Order a 150 × 100 mm sample, £15 delivered

Glass
5mm toughened mirror glass, polished edges
Heat
Heat resistant to over 400 °C — safe behind gas, induction and range hobs
Size
Made to measure — any width and height, cut to the millimetre; socket cut-outs and shaped edges available. How to measure (PDF)
Fitting
Fit it yourself with neutral-cure silicone, over tiles or plaster — no grout. Fitting guide (PDF)
Made in
Our own workshop in Belfast, Northern Ireland
Lead time
Stock sizes in around a week; bespoke sizes, shapes and cut-outs typically 2–4 weeks
Price
From £50.00 inc. VAT, delivered to UK mainland and Ireland. See prices by size
Samples
150 × 100 mm sample of the real glass, £15 delivered
Details

Onyx is the first design in our Stone & Marble mirror collection: a flowing band of onyx that appears to float inside bright toughened mirror. The stone is translucent at its edges and dense at its core, with fine veins that let the mirror show through, so your kitchen is reflected back through the stone and the room looks bigger, brighter and far more expensive than it cost.

Twelve colourways

Amber, Gold, Copper, Terracotta, Rose, Smoky Purple, Blue Grey, Sapphire, Teal, Verde, Sage and Smoke. Pick a colour from the Mirror Colour dropdown to preview it on the main image.

Made to your size

Enter your width and height below. Panels for behind a hob (around 900 x 750mm landscape or 600 x 750mm portrait) and full-length runs up to 2400 x 550mm each get their own composition, so the band always sits well within the panel.

See it on your phone

Open the Onyx visualiser to watch the design drift across a mirror on your own screen and switch between all twelve colourways.

6mm toughened glass as standard with polished edges, suitable for use behind all hob types, made to order in Belfast and delivered across the UK. All edges are polished with a 1.5mm bevel. Samples are available to order on this page.

Measuring & fitting

Measure the finished opening in millimetres at three points and send the smallest. Allow 2–3 mm clearance at each side.

Fix with the adhesive and sealant option, or screws through pre‑drilled holes. Step‑by‑step guides are in Tutorials.

Delivery & lead times

Every panel is made to order. Rectangular panels usually take 3–4 weeks; shaped panels and panels with holes take the longest because they're cut on the CNC and go through an extra inspection.

If you're working to a fitter's date, call us before ordering and we'll tell you the current lead time.

Care

Warm water and a soft cloth. No abrasives or scouring pads. The Easy Clean coating makes grease wipe off with less effort; it isn't a substitute for cleaning.

Onyx is the first design in our Stone & Marble mirror collection: a flowing band of onyx that appears to float inside bright toughened mirror. The stone is translucent at its edges and dense at its core, with fine veins that let the mirror show through, so your kitchen is reflected back through the stone and the room looks bigger, brighter and far more expensive than it cost.

Twelve colourways

Amber, Gold, Copper, Terracotta, Rose, Smoky Purple, Blue Grey, Sapphire, Teal, Verde, Sage and Smoke. Pick a colour from the Mirror Colour dropdown to preview it on the main image.

Made to your size

Enter your width and height below. Panels for behind a hob (around 900 x 750mm landscape or 600 x 750mm portrait) and full-length runs up to 2400 x 550mm each get their own composition, so the band always sits well within the panel.

See it on your phone

Open the Onyx visualiser to watch the design drift across a mirror on your own screen and switch between all twelve colourways.

6mm toughened glass as standard with polished edges, suitable for use behind all hob types, made to order in Belfast and delivered across the UK. All edges are polished with a 1.5mm bevel. Samples are available to order on this page.

*
*
*

Toughened

Mirror you can put behind a gas hob.

Mirror that hasn't been toughened cracks behind a gas hob. For years that kept mirror on the wall above the mantelpiece and out of the kitchen.

Every panel we make is toughened safety glass, heat resistant to over 400 °C, so the splashback can run the full length of the worktop without a break for the cooker.

Made to measure

Cut to the millimetre, in Belfast.

  1. You measure

    Width and height in millimetres, plus a template for any sockets or shaping.

  2. We cut

    Rectangles by hand; shapes and holes on the CNC, to your drawing.

  3. Polish

    Every edge polished with a 1.5 mm bevel, so it's safe to handle and clean to look at.

  4. Toughen

    Heat‑treated for strength, then checked flat before it goes any further.

  5. Finish & deliver

    Inspected, crated and sent out, usually within 3–4 weeks.

Samples

See it in your light first.

Photographs flatten a mirror. A 150 × 100 mm sample on your worktop, next to your cabinets, settles it in a minute. £15 delivered.

Order a sample

Questions

Asked most often.

Can it really go behind a gas hob?

Yes. The glass is toughened and heat resistant to over 400 °C. Non‑toughened mirror would crack; this won't.

Can you cut holes for sockets and switches?

Yes. Choose the number of cut‑outs above and send a template or the socket positions; we cut them on the CNC. Holes are the same diameter as the glass thickness.

How long will it take?

Rectangular panels are usually with you in 3–4 weeks. Shaped panels and panels with holes take the longest. Call for the current lead time if you're working to a date.

What's the largest size?

2400 mm in either direction as a single panel. Longer runs are made as matched panels with a neat join.