Moroccan Tiles Antique Mirror Splashback

Take a closer look 🔍
Mobile- hold finger on image
Desktop- Hover over image

Our unique high end Antique Mirror Moroccan Tiles Glass Splashback is made from toughened glass that has been cut to your specification before being produced. Our splashbacks can be shaped to fit under practically any cooker hood. This custom made splashback is heat resistant to over 400C. Provides protection from splashing grease when cooking and is easy to clean. Manufactured to be UV resistant so it doesn't fade in normal conditions.

*Please note the design will be sized/scaled differently to suit the splashback size ordered. Each tile is sized to be 100mm x 100mm (10cm x 10cm), so 750mm high would be 7.5 tiles high for example

Width (mm) *
Height (mm) *
Fixing Option *
Add Easy Clean * A hydrophobic nano coating that makes the surface more grease and water repellent
Cut Outs * (Tell me more)
Foil Backing (optional) * Provides extra protection to the backing by protecting against wall salts and damp
Shaping * (Tell me more)

£75.00

- +

Easy to clean antique mirror splashbacks, Easy Clean coating is available also which helps repel grease

The Moroccan Tile Pattern is Black with serveral shades of Grey backed with silver mirror

Made from toughened glass and heat resistant to over 400C (degrees celsuis)

All edges are polished with a 1.5mm bevel

If drill holes are ordered they are the same thickness of the glass due to the toughening process and requirements

(with the exception of 4mm thickness which has 6mm holes)

Brushed Glass Splashbacks

Brushed Glass Splashbacks have a more scratch resistant, non reflective, matt glass finish but are not available in low iron so lighter prints may be affected by the natural green tinge of glass.

Order times and delivery

The below sizes are in stock ready to be digitally printed- these sizes are generally delivered in around 1 week. Any shaped splashbacks, splashbacks with holes, thicknesses other than 6mm and made to order/bespoke sizes typically take 2-4 weeks as long as they pass quality control. Shaped panels take the longest duration as the manufacturing process is more complex and made using a CNC. In stock sizes (without holes, rectangular or square shaped).

600mm x 600mm without holes
600mm x 700mm without holes
600mm x 750mm without holes
700mm x 700mm without holes
700mm x 750mm without holes
900mm x 700mm without holes
900mm x 750mm without holes
Please note that the above stock sizes do not come with drill holes, if required we would need to make to order

Glass thickness

A number of glass thicknesses are available, they are all perfectly suitable for use as a kitchen splashback. Thicker sizes can be useful to match existing worktop upstands or to cover any gaps between the worktop and the wall.

Glass and image colours

All of our coloured and printed glass splashbacks are manufactured using low iron glass, also known as optically clear glass. Low iron glass has, as the name suggests, a low iron content (not completely iron free)- so generally speaking colours viewed from the front of the glass are more or less the same as colours on the back. However, as the colours and designs are on the rear of the glass there can be differences in colour due to light refraction and reflection i.e. the colour can be affected by the colour of the light in the room. Thicker glass will affect the colours more as there is more glass to refract an reflect the light.

SAMPLES

Samples cost £15 delivered (non refundable) and are 150mm x 100mm. You can order an antique mirror sample on this page.

Overview
Contact Us