Brass Nuvola Mirror Splashback

The Brass Nuvola mirror splashback range from DIY Splashbacks is made in UK using toughened glass. so they can be safely used behind all kitchen hobs without risk of breaking. Our Brass Nuvola splashbacks compliment many kitchen styles including classic and contemporary. The reflection is subtly broken up when closer to it making it a stunning feature kitchen wall covering.

If this product is of interest, check out our range of Antique Mirror Splashbacks also.

SAMPLES

Our samples are 150mm x 150mm so a good size to get a better idea of how our antique mirrors look. You can order a mirror sample on this page.

Easy to clean toughened mirror effect splashbacks, suitable for use behind all hob types and heat resistant to over 400C (degrees celsius)

Easy Clean coating is available also which helps repel grease- easy clean is a hydrophobic, water and grease repellent nanocoating

All edges are polished with a 1.5mm bevel

If drill holes are ordered they are 5mm diameter, screws will be provided

How to measure and fit

Measuring and fitting instructions may be found here, when ordering we would advise you order a iny bit smaller to allow for expansion (4mm off the width and 2mm off the height)

Antique Mirror Splashbacks

The most in demand splashback design at present are antique mirror splashbacks but up until now is has not been possible to toughen/temper antique mirror. By using pioneering techniques we are now able to offer antique mirror splashbacks, made from toughened glass, made to any size or shape.

Authentic Antique Mirror is caused over time by oxidation of the mercury backing used to make a mirror reflective. Modern antique mirrors though are reproductions, the aging process has been sped up using chemicals to replicate the oxidation cause to a mirror over time. Tempered Antique Mirrors are also reproductions where we have used techniques to replicate the oxidation on a mirror splashback. Unlike authentic antique mirrors though, which will of course have gathered surface damage over time, our antique mirror splashbacks for kitchens and bathrooms will have defect free surfaces and modern beveled edges.

Order times and delivery

All Antique Mirror splashbacks are made to order (usually take 3-4 weeks to manufacture).

Any shaped splashbacks, splashbacks with holes and made to order/bespoke sizes typically take 3-4 weeks as long as they pass quality control. Shaped panels take the longest duration as the manufacturing process is more complex and made using a CNC. In stock sizes (without holes, rectangular or square shaped). Lead times can vary throughout the year so if you would like to know our current lead times prior to ordering please just give us a call.

Measure the finished opening in millimetres at three points and send the smallest. Allow 2–3 mm clearance at each side.

Fix with the adhesive and sealant option, or screws through pre‑drilled holes. Step‑by‑step guides are in Tutorials.

Every panel is made to order. Rectangular panels usually take 3–4 weeks; shaped panels and panels with holes take the longest because they're cut on the CNC and go through an extra inspection.

If you're working to a fitter's date, call us before ordering and we'll tell you the current lead time.

Warm water and a soft cloth. No abrasives or scouring pads. The Easy Clean coating makes grease wipe off with less effort; it isn't a substitute for cleaning.